About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

Product 1 of 13 >>
Rosemount XMTR Seals

Rosemount Guide to the Selection of Diaphragm Seals



Please Call 1-618-465-7623 for a Quote on this product!

Description
  • Diaphragm Seals are used for the following:

    • The process temperature is outside of the normal operating ranges of the transmitter and cannot be brought into those limits with impulse piping.

    • The process is corrosive and would require frequent transmitter replacement or exotic materials of construction.

    • The process contains suspended solids or is viscous and may plug the impuse piping.

    • There is a need for easier cleaning of the process from the connections to avoid contamination between batches.

    • There is a need to replace wet/dry legs to reduce maintenance on applications where the reference leg is not stable or often needs to be refilled/drained.

  • Topics covered in Rosemount Guide:

    •  What is a diaphragm seal system?

    • Temperature Effects

    • Time Response

    • Direct Mount vs. Capillary Systems

    • Balanced Systems vs. Tuned Systems

    • High Temperature and Vacuum Service

    • Fill Fluid Selection Criteria

Click Below to view the full spec           

Phone 618-465-7623

FAX 618-465-7679

Telephone Icon

Click here to get the full Rosemount Diaphragm Seals Catalog



Email To Friend

Suggested Accessories
Test Gauges, Series PL Industrial, Stainless Steel
Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map