Flowline Commander™ Multi-Channel Relay Controller

The general purpose controller has a graphic display with four 4-20 mA transmitter input channels and 6 programmable relays. Select from one of three run mode configurations including 1) Multi-tank with 4 inputs and 4 relays; or 2) Pump control with 1 input and 6 relays for lift stations including duplexing; or 3) Differential level with 2 inputs and 4 relays for municipal screen or rake control. Each relay can be configured on a single set point or latched on two set points for automatic fill or empty control. The LCD displays engineering units, relay and span status for each channel. The MicroSD card is ideal for data-logging storage and retrieval.

Specifications

Dimensions:	3.7" x 3.7" x 2.5"
Weight:	12.5 oz (0.354 kg)
Cut-out:	3.622" x 3.622"
Max panel thick:	5 mm
Supply voltage:	10-30 VDC
Num. of channels:	4
Input ranges:	4-20 mA
Num. of outputs:	6 relays
Type:	Mechanical contact
Num. of commons:	6
Max. output current:	3A at 250 VAC resistance
Max. output voltage:	275 VAC, 30 VDC
Max. switched power:	1250 VA, 150 W
Oper. temp.:	F: 32° to 122° C: 0° to 50°
Environmental:	F: 32° to 122° C: 0° to 50°
Enclosure rating:	NEMA 4X
Rel. humidity:	5 to 95% non-condense
Intern. memory:	256 KB
Opt. memory card:	Up to 1 GB
Logic scan rate:	1.2 mS/K
Graphics / text:	Yes
Display technology:	Backlit LCD
Pixels count:	128 x 64
Terminal type:	Screw type, 5 mm rem.
Certifications:	CE, UL