Flowline EchoSpan™ GP Ultrasonic Transmitter, Non-contact Measurement with Display

Flowline EchoSpan™ GP Ultrasonic Transmitter, Non-contact Measurement with Display

Push button calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications.

The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8' or 10m, and is ideally suited for challenging ultrapure, corrosive or waste liquids. Push button calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide.

Specifications
Range:
LU81: 8" to 16.4' (20cm to 5m)
LU83: 8" to 26.2' (20cm to 8m)
LU84: 12" to 32.8' (30cm to 10m)
Accuracy:
± 0.2% of span in air
Resolution:
LU81/83: 0.039" (1 mm)
LU84: 0.078" (2 mm)
Beam width:
3" (7.6 cm) dia.
Dead band:
LU81/83: 8" (20 cm)
LU84: 12" (30 cm)
Display type:
LCD, 6-digit
Display units:
Inch, cm and percent
Memory:
Non-volatile
Supply voltage:
12-28 VDC
Loop resist.:
500 Ohms @ 24 VDC
Signal output:
4-20 mA, two-wire
Signal invert:
4-20 mA, 20-4 mA
Calibration:
Push button
Fail-safety:
Selectable 4mA, 20mA
21mA, 22mA or hold
Process temp:
F: -4° to 140°
C: -20° to 60°
Temp. comp.:
Automatic
Ambient temp:
F: -40° to 160°
C: -40° to 71°
Pressure:
30 psi (2 bar) @ 25°C., derated @ 1.667
psi (.113 bar) per °C.
above 25°C.
Enclosure rating:
NEMA 4X (IP65)
Enclosure vent:
Water tight membrane
Encl. material:
PC/ABS FR
Trans. material:
PVDF
Process mount:
2" NPT (2" G)
Mount gasket:
Viton®
Conduit entrance:
Dual, 1/2" NPT
Classification:
General purpose
Compliance:
CE: EN61326, EMC

Please visit Industrial Process and Sensor for more info.

Back to Product List