CSA approved intrinsically safe for use in general purpose or hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement
| Range: |
6" to 18' (15cm to 5.4m) |
| Accuracy: |
±
0.25% of span |
Resolution: |
0.125" (3 mm) |
| Beam width: |
8° conical |
| Dead band: |
6" (15cm) |
Display type: |
LCD, 4-digit |
Display units: |
Inch or cm |
Memory: |
Non-volatile |
| Supply voltage: |
12-32 VDC |
Loop resist.: |
600 Ohms @ 24 VDC |
| Signal output: |
4-20 mA, two-wire |
| Signal invert: |
4-20 mA, 20-4 mA |
| Calibration: |
Push button |
| Fail safety: |
Reverts to safe state during echo loss |
| Process temp: |
F:
-4° to 140° C: -20° to 60° |
| Temp. comp.: |
Automatic |
| Ambient temp: |
F:
-40° to 140° C: -40° to 60° |
| Pressure: |
30 psi (2 bar) @ 25° C., derated @ 1.667 psi (.113 bar) per °C. above 25° C |
| Enclosure rating: |
NEMA 4X (IP65) |
| Encl. material: |
PP, UL94VO |
| Trans. material:: |
PVDF |
| Process mount: |
2" NPT (2" G) |
| Mount. gasket: |
Viton® |
| Conduit entrance: |
Single, 1/2" NPT |
| Classification: |
Intrinsically Safe |
| Approvals: |
CSA: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; T3C |
| Parameters: |
CSA: Vmax < 32.0 V; Imax < 130 mA; Ca = 0 uF' La = 0 uH |
| Certificates: |
CSA: LR 79326 |
| CE compliance: |
EN 61326 EMC |
Please visit Industrial Process and Sensor for more info.