About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 6 of 9 >>
Crystal Engineering MultiCal

Crystal Engineering MultiCal



Please Call 1-618-465-7623 for a Quote on this product!

Description

NASA's DMM pressure solution!

The MultiCal pressure module is chosen by NASA for the Space Shuttle and International Space Station. These modules convert your meter into an accurate pressure measuring system. The analog signal is clean, accurate and fast, so you can even use MultiCals with oscilloscopes to measure dynamic pressure.

  • Converts a meter into a high accuracy pressure measuring system
  • 1k Hz pressure response
  • Connects directly to oscilloscopes
  • Lightweight
  • Runs on single 9V battery
  • Millivolt output
  • Comes with a dual banana jack cable and holster case

Accuracy
MODEL "H20/PSI
0 to 830 "H2O: ±(0.05% of reading + 0.1"H2O)
0 to 30 PSI: ±(0.05% of reading + 0.01 PSI)
30 to 50 PSI: ±(0.25% of reading)
0 to -14.7 PSI: ±(0.5% of reading + 0.02 PSI)
Over Pressure: 100PSI

MODEL "Hg/PSI
0 to 30 "Hg: ±(0.1% of reading + 0.01"Hg)
0 to -30 "Hg: ±(0.1% of reading + 0.01 "Hg)
0 to 500 PSI: ±(0.1% of reading + 0.02 PSI)
0 to -14.7 PSI: ±(0.25% of reading)
Over Pressure: 1000 PSI

MODEL "HgA/mmHgA
0 to 760 mmHgA: ±(0.08% of reading + 0.2 mmHg)
0 to 30 "HgA: ±(0.08% of reading + 0.01"Hg)
30 to 60 "HgA: ±(0.25% of reading)
Over Pressure: 100 PSIA

MODEL mmHgA/PSIA
0 to 760 mmHgA: ±(0.08% of reading + 0.2 mmHg)
0 to 30 PSIA: ±(0.08% of reading + 0.01 PSI)
Over Pressure: 100 PSIA

Temperature
Operating & Compensated: -10°C to 50°C (14°F to 122°F).
Storage: -40°C to 75°C (-40°F to 167°F).

Connections
Pressure connection: 2 x 1/8" NPT (Female)
Banana jacks: 4mm plugs on 19mm (0.75") centers

Media Compatibility 
Liquids and gases compatible with PTFE
(Polytetrafluoroethylene) penetrated, hard anodized, aluminum (transducer housing), 316 stainless steel, buna-n (O-ring).

Power
Battery: One standard 9V battery.
Battery life: 400 hours typical (alkaline battery).

Enclosure
Dimensions: 50 mm (2.0”) W x 117 mm (4.625") L 
Weight: 85 g (3 oz.)

Sensor
Our sensor is all welded stainless steel. It does not use o-rings, thread tape, sealant, or epoxy. As a result, the MultiCal can be safely used with any liquid or gas compatible with 316 stainless steel.



Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map