About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 8 of 12 >>
Flowline FloaTek GP Float Transmitter

Flowline FloaTek GP Float Transmitter



Please Call 1-618-465-7623 for a Quote on this product!

Description
The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids. The transmitter is typically selected for hight temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil.

Specifications
Range:
6" to 96" (15.2cm to 2.4m)
Accuracy:
0.25% over span in water
Specific gravity:
0.55 minimum
Orientation:
± 30° from vertical
Supply voltage:
10 to 30 VDC
Loop resist.:
600 Ohms @ 24 VDC
Signal output:
4-20 mA, two-wire
Calibration:
None, fixed span
Process temp.:
F: -40° to 185°
C: -40° to 85°
Pressure:
200 psi (13.8 bar)
Enclosure rating:
NEMA 4X (IP65) / NEMA 7
Encl. material:
PP, UL94VO
Guide/float mat:
316 ss
Process mount:
2" NPT
Conduit entrance:
Single, 1/2" NPT
Classification:
General purpose
Compliance:
CE


Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map