Flowline Thermo-Flo™ Liquid and Gas Flow Switch

Flowline Thermo-Flo™ Liquid and Gas Flow Switch

Offered in liquid and gas configurations for low-flow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media.

Offered in liquid and gas configurations for low-flow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media. Liquid examples include deionized water and sulfuric acid. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2" to 11/2"; the long sensor is applied in 2" and up. The liquid switch set point may be adjusted from 0.04 to 3 fps, and the gas switch from 1 to 90 fps.

Specifications
Set point range:
FT10: 0.04 to 3 fps (0.012 to 0.91 mps)
GT10: 1 to 90 fps (0.3 to 27 mps)
Repeatability:
± 0.5% of set point
Supply voltage:
12-36 VDC
Contact type:
(1) SPST relay
Contact rating:
60 VA
Process temp:
F: 32° to 140°
C: 0° to 60°
Pressure:
150 psi (10 bar)
Cable length:
10' (3m)
Sensor rating:
NEMA 4X (IP65)
Process mount:
3/4" NPT (3/4" G / Rp)
Sensor material:
PP-Ryton® / PVDF
Classification:
General purpose

Please visit Industrial Process and Sensor for more info.

Back to Product List