Rosemount Guide to the Selection of Diaphragm Seals

COMPLETE GUIDE FOR SPECIFYING TRANSMITTERS AND DIAPHRAGM SEALS

Diaphragm Seals are used for the following: The process temperature is outside of the normal operating ranges of the transmitter and cannot be brought into those limits with impulse piping. The process is corrosive and would require frequent transmitter replacement or exotic materials of construction. The process contains suspended solids or is viscous and may plug the impuse piping. There is a need for easier cleaning of the process from the connections to avoid contamination between batches. There is a need to replace wet/dry legs to reduce maintenance on applications where the reference leg is not stable or often needs to be refilled/drained.

Topics covered in Rosemount Guide:  What is a diaphragm seal system? Temperature Effects Time Response Direct Mount vs. Capillary Systems Balanced Systems vs. Tuned Systems High Temperature and Vacuum Service Fill Fluid Selection Criteria

Click Below to view the full spec

Phone 618-465-7623

FAX 618-465-7679

Click here to get the full Rosemount Diaphragm Seals Catalog