About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 9 of 12 >>
Flowline DeltaSpan External Pressure Transmitter

Flowline DeltaSpan External Pressure Transmitter



Please Call 1-618-465-7623 for a Quote on this product!

Description
The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column. Select the -S_01 for cable termination or the -S_11 for conduit termination with an integral junction box. The transmitter is best applied with clean liquid or gas media including water, oil and air. Application examples include irrigation equipment, pumping systems and compressors.

Specifications
Range:
-S0_1: 0 to 5 psi (0.34 bar) 0 to 11' (0 to 3.4m) wc
-S2_1: 0 to 15 psi (1 bar) 0 to 34' (0 to 10.4m) wc
-S4_1: 0 to 30 psi (2 bar) 0 to 69' (0 to 21.1m) wc
Accuracy:
± 0.25% of full span
Supply voltage:
13 to 30 VDC
Max. loop resist.:
1300 Ohms @ 30 VDC
Signal output:
4-20 mA, two-wire
Calibration:
None, fixed span
Process temp.:
F: 0° to 200°
C: -18° to 93°
Temp. comp.:
Automatic
Proof pressure:
2 x full span
Burst pressure:
> 35 x full span
Process mount:
1/4" NPT
Enclosure rating:
NEMA 4X (IP65)
Probe material:
316 SS & 316L SS
Termination:
-S_01: 3' (1m) cable
-S_11: Junction box with 1/2" NPT conduit connector
Cable material:
Polyurethane
Cable type:
2-conductor, shielded
Classification
General purpose
CE compliance:
CE: EN55022, EN55024, EN61000


Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map