About    Home Page    Order Info    Thermocouples    Legal/Privacy    Contact  

The products listed represent only a small selection of the available IPS product line.
To discuss your specific application with an experienced technician.

Please Call 618-465-7623

<< Product 10 of 12 >>
Flowline DeltaSpan Submersible Pressure Transmitter

Flowline DeltaSpan Submersible Pressure Transmitter

Please Call 1-618-465-7623 for a Quote on this product!

The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media. Application examples include ground water, ponds and wells. Select the LD32 for dirty, sludge or slurry media. Application examples include sewer or storm pump lift stations, storage and treatment with surface foam or debris where ultrasonic cannot be applied.

-S_01: 0 to 5 psi (0.34 bar) 0 to 11' (0 to 3.4m) wc
-S_11: 0 to 10 psi (0.69 bar) 0 to 23' (0 to 7m) wc
-S_21: 0 to 15 psi (1.0 bar) 0 to 34' (0 to 10.4m) wc
-S_31: 0 to 20 psi (1.38 bar) 0 to 46' (0 to 14m) wc
± 0.25% of full span
Supply voltage:
13 to 30 VDC
Max. loop resist.:
900 Ohms @ 30 VDC
Signal output:
4-20 mA, two-wire
None, fixed span
Process temp.:
F: 0° to 200°
C: -10° to 93°
Temp. comp.:
Proof pressure:
2 x full span
Burst pressure:
> 35 x full span
Process mount:
1/2" NPT
Enclosure rating:
NEMA 6 (IP67)
Probe material:
LD31: 316 SS, 316L SS & Buna-N w/PVC nose
LD32: 316 SS, 316L SS & Buna-N
Cable material:
S1_1: Polyurethane
S2_1: ETFE
Cable type:
2-conductor, shielded w/vent tube
General purpose

Email To Friend

Home | About | Contact | Ordering Info |Thermocouples

© 2003-2009 Industrial Process and Sensor. All rights reserved.

All product names throughout this website are trademarks of their respective holders.
site map